TIG welders online shopping UK: If value for money is a priority to you, take a look at this drill from Evolution. It is a solid and durable drill that will get the job done for the professional steelworker as well as the weekend handyman. This drill has a 6-inch stroke length and comes with a 0.5-inch chuck and key. The drilling range has a diameter from 7/16? to 1-1/8? and cutting depth of 2 inches unless you change out the chuck to something else. You can place the feeding handle on either side of the drill, depending on what is comfortable to you. The heavy-duty magnet makes it easy to do overhead or horizontal drilling. An integrated cooling system will keep your magnetic drill press from overheating. There are some drawbacks to this drill. It can only turn at the speed of 570 RPM. This works great for when you are drilling steel or aluminum, but this speed is too high for drilling titanium or stainless steel. This drill may also be more primitive than conventional high-end magnetic drill presses. Welding Supplies Direct stock a wide range of mag drills from industry leading manufacturers such as JEI Solutions, Alfra, Rix Tools, FEIN & Holemaker Technology. Our flagship mag drill partner, JEI Solutions, have a range that is suitable for every drilling / broaching application; be it low profile applications, on-site cutting for structural jobs or simple at home, DIY drilling. The HMT VersaDrive V35 is a British made 35MM mag drill that is available in both 110V & 230V input voltages. It has a 35MM maximum cut capacity with a 110MM maximum cutter length and is perfect for all drilling applications, especially structural steelworks. Find additional info at Mag drills.
Important Industrial Gas Cylinder Safety Guidelines to Keep in Mind: Acetylene and oxygen are two industrial gases widely used across various industries. The cylinders accommodating these gases are designed with user’s safety in mind. However, that is not enough to ensure optimum safety in an industrial facility. The following factors will help ensure the same: Understand the Cylinder Properly: A personnel should be familiar with the potential risks and hazards associated with compressed gases while handling them. It is important to understand the properties of the gas filled within such as toxicity, flammability limits, and toxicity – Threshold Limit Value (TLV). Also, it is important to understand the hazards posed by gas at low temperature, high pressure or due to the physical state of the gas – non-liquefied or liquefied, etc. A personnel should read the contents of the label on the cylinder. If the label is missing or not easily readable, then the cylinder should not be used. In addition to improving a personnel’s understanding on oxygen cylinder safety or acetylene cylinder safety, he should be administered a proper plant safety training.
Whether you’re a professional contractor or a DIY enthusiast and looking for a metal-cutting tool, this disc is a must-have. The cutting wheel is a great way to quickly cut through metal. With 52 wheels, you’ll always have one on hand. It is compatible with all 4-1/2 inch (115mm) angle grinders with 7/8 inch (22.2mm) arbor. The thickness of the wheel is 0.045 inch (1.2mm). You can operate this up to 13,300 RPM When it comes to precision and burr-free cutting, the Truswe Metal and Stainless Steel Cutting Wheel for Angle Grinder is tough to beat. This ultra-thin design delivers fast and accurate performance, with minimal material loss. The Metal Cutting Discs are made of aluminum oxide grains which are more safe than other wheel types. These discs should only be used when wearing all applicable safety gear because they can fly off the wheel and injure you if not careful. You should read the instructions before using this power tool. It is a heavy duty cutting disc that is fitted to any angle or side grinder. It will cut with ease through sheet metal, plastics, fiberglass, Plexiglas, ceramic tiles and even rubber.
The Hobart Ironman 240 is the updated version to the Ironman 230 that recently has been discontinued. The 240 is a well-reviewed welder that delivers a wide range of power from 30 to 280 amps in a heavy-duty American-made chassis. Hobart equips the Ironman series with its “soft arc” technology for an easier striking, more spatter-free arc. If you are looking to weld aluminum, then like most of their MIG welders, they offer the package with a SpoolRunner 200 spool gun found here, for a few hundred extra bucks. This is a full-sized platform, offering a 15-foot gun connection and able to load a 44-pound spool of wire. Hobart backs the Ironman 240 with a strong five-year limited warranty. The power regulator has 12 notch settings for easy feel when setting the power level with gloves. This power regulator knob seems to be a problem for some users who have reported issues with the knob rotating freely and not changing the power setting. The only downside to this model is that it is unable to run directly off of a generator as it causes problems with the SCR firing timing of the welder. This makes it a bit less portable than some other welders, but nothing you can’t work around. Overall, this is a quality industrial-grade welder which is ideal for farm work which has been compared to Miller 252 – just without the digital screens and a few other features that most people wouldn’t need, but costs a lot less making it excellent value for the money.
Many companies get completely “bogged down” in the paperwork required to run a business. But with today’s latest technological advances, there are items that can be a great help. For instance, Lincoln Electric offers something called ArcWorks software which can document procedures, create drawings everyone in the shop can access, keep track of welding operator’s qualifications, and many other things. Software such as this can be tailored to the individual company’s needs and provide great efficiencies and also eliminate mistakes. Adding Robotics or Hard Automation to the Operation: Today’s technological advances offer many options. Robotics can be justified when the volume of parts a company produces is so great that it can offset the monies spent on a robot. Robotics can also be considered if there are a number of different parts that are similar enough in nature to be able to be handled by the same robot. If robots are not justified, a company might determine that fixturing or hard automation could be used to increase efficiency or quality. One company incorporated fixturing and clamps to hold down a tank while the seam was being welded. In another case, an automotive manufacturer decided that automation was necessary because of the amount of parts and intricate angles and welding positions.
How to pick a welder tips: Fan on demand: Lowers running costs and reduces contamination to internal components. The fan kicks in when it’s needed, rather than running all day. Printed Circuit board protection: If the machine’s PCB’s are protected from dust & kept away from the fan, reliability will increase. Some manufacturers’ have the parts that need cooling in a duct type housing & the PCB isolated separately. Step voltage settings: If you’re looking at step voltage conventional MIG with multiple power settings – “the more the better!”
The 720 Watt, 6 Amp motor spins the cutting discs up to an impressive 11,000 rpm. That’s more than enough power output to get just about any job done with a 115 mm disc. Weighing in at less than 2 kg, it’s light enough to use one-handed if you’re brave enough. For two-handed use, there’s an indestructible plastic side handle that you can screw into either side. The thing I like about this handle is the 20° angle. You get a better grip for more precise grinding work, compared with standard right-angle grips. Another bonus feature found on this grinder is the soft start. For such a powerful bit of kit, it doesn’t feel like it’s going to jump out of your hand when you turn it on. And thanks to the anti-restart function, it’s safe to use as well.
Several tips on welding equipment, MIG and TIG welders, plasma cutters. Stick Welding — If you learned to weld years ago, you likely learned using an arc welder. Stick welding for many years has been the most popular method for most home-shop welding needs. This process uses an electric current flowing from a gap between the metal and the welding stick, also known as an arc-welding electrode. Stick welding is an effective method for welding most alloys or joints and can be used indoors and outdoors or in drafty areas. It’s also the most economical welding method and provides the ability to create an effective bond on rusty or dirty metals. However, this method is limited to metals no thinner than 18-gauge, requires frequent rod changing, emits significant spatter and requires that welds be cleaned upon completion. Stick welding is also more difficult to learn and use, particularly the ability to strike and maintain an arc. Arc welders are available in AC, DC or AC/DC, with AC being the most economical. It’s used for welding thicker metals of 1/16 inch or greater. These machines are a good choice for farmers, hobbyists and home maintenance chores.
120V Input Power and 155 CFM Airflow. The machine requires 120V input power to generate 155 CFM airflow. You can adjust the airflow from 20 different settings as you need. It can provide support to 2 other operators at a time if you just install a second arm. 3-stage Filter and Suitable for Benchtop Soldering. The machine can be operated with a remote wirelessly, which makes it extremely useful. The 3-stage filter comes with Carbon, HEPA, and pre-filter, which I found to be effective for any welding work. At 50% motor speed, it generates 53 dBA sounds and produces only 63 dBA sounds at 100% motor speed. PACE Arm-Evac 150 can be used for any sort of benchtop soldering, industrial solvents, and lasers. It’s the best portable weld fume extractor for medium-level welding tasks.
The story of ESAB is the story of welding. When our founder Oscar Kjellberg developed the world’s first coated welding electrode in 1904, he launched a company whose innovation and uncompromising standards have helped create the history of welding itself. For more than 100 years, ESAB has been powered by the will to continuously seek new and improved ways of serving our customers. This has made ESAB a world leader in welding products and advanced cutting systems. In 2012, ESAB was acquired by Colfax Corporation, one of the world’s leading diversified industrial manufacturing companies. Colfax, like ESAB, is a solidly customer-focused company that places strong emphasis on constant innovation and improvement. From the firsts by our founder to our global growth, we take pride in what we’ve accomplished in more than a century. But we do so with a keen eye on the future. What can we do better? It’s only when we seek to build upon all we’ve learned, to perfect the innovations our customers count on to work confidently, and push ourselves and our company further that we can boldly face the future. This is how we continue to write the history of welding and cutting. At the end of the day, it’s not where you’ve been that matters most – it’s where you’re going. And for us, that’s forward.
Our welding tables are to be self-assembled. This is an easy process; full instructions are provided. A wide range of tools are available for use with these tables and they are available as added optional extras in the custom options above. If you require guidance on which tool set would be the most suitable for you please feel free to call our helpful staff. *Please note that current lead times on these welding tables are 3-4 weeks, however if you require the table quicker please alert us and we will do our best to assist with your enquiry*
UK market choice: Miller is a Wisconsin-based company that has been in the business since 1929. At just 38 pounds, the Millermatic is ultra-portable and is one of the lightest welders on our list. It is preferred by amateur welders and professionals alike for its usability. It is also one of the most expensive at over $3300, so bear that in mind as you read on! The Millermatic runs at dual voltage. It welds stainless steel, mild steel, and aluminum (with the help of a spool gun). It can weld mild steel to a thickness of 3/8 inches, giving it greater ability than the Hobart Handler. As for its aluminum welding capabilities, it can weld from 18 gauge to 3/8 inches again. It comes with flux core abilities.
The Hobart Handler 140 is an excellent choice for beginner welders, which is why it’s probably the most popular welder on the market. This thing is solidly built and is a step above many of the other 140A welders. The arc runs smooth and produces great results. It’s suitable for a range of general repair tasks and projects like trailer frames, autobody repair and anything up to 1/4 inch thick. If you’re just getting into welding, you can’t go wrong with this little machine! What’s better is that it’s an absolute steal at under $500. See the full review here.
For some people, the best MIG welder is one that they can take with them wherever their jobs might take them. Welding is one of the most in-demand talents in the UK at the moment, with plenty of manufacturers and mechanics on the hunt for flexible experts who can deliver state-of-the-art welds in a hurry. This MIG Welder portable inverter system comes with everything you need to take your talent with you on-the-go. The system is neatly contained within a compact and light-weight blue package, where you’ll find everything you need for a car welder or home welder, including an optional spool gun for aluminium welding, a 3M MIG torch, earth clamp and lead, and gas hose & regulator. There’s also an easy-to-follow manual included, and a 3-year warranty if you’re concerned about getting the most out of your investment. Overall, this welding machine, created by R-Tech is perfect for people who want to get the most out of a smooth and efficient MIG welding experience. It offers an all-in-one kit for professionals and beginners alike, although it seems to be designed more for the everyday welder than the hobbyist. Discover more details at weldingsuppliesdirect.co.uk.
If you are a real handyman, you might have done some metal works, not to mention joining and installation. Yet, if you have some experience and you are ready to pick up the gauntlet of repairing metal gates or welding a pedal to a bicycle, a MIG welder is what you need! A few welding methods are known such as MMA, TIG, MIG, and MAG. We will look through MIG welders in our review. A MIG welder uses a streaming inert gas that acts as a shield and expels air contaminants from a weld zone. If no gas is used, the seam is porous and infirm. We will review household MIG welders plugged to a power outlet. Such welders can fuse stainless steel sheets and weld cracks and holes on cars, etc. We have examined 5 best MIG welders to help you buy an appropriate model for your welding needs. Also, we advise paying attention to sandblasts and that will help you get the surface prepared before welding, as well as angle grinders for cutting metalware.